Wednesday, November 4, 2009

So I got the majority of the foam profiles for the bench done today but I still have a ton of work to do. I need to finish the foam profiles and get them glued together, then I need to cut the negative spaces for the pump and ceramic filter. then i need to fiberglass the foam (which i know is time consuming). After the fiberglass is finished I need to spot fill with bondo and sand and paint. I doubt all this is going to be done by the mid crit, but it's vital that I'm getting this tough work done now so I can make adjustments and be ready for the final crit.

Tuesday, November 3, 2009

Oct. 29, 2009

Farmers Market Adventure. Logan and I went to a farmers market recently so that we'd be able to test the differences between the taste of organic, farmers market produce and store bought produce. I bought some tomatoes, and Logan bought some kale. I don't really have a very discerning palette so I'm not really sure if I actually noticed a difference in the taste. Also, realistically it would probably have been a better idea to do a blind test so I didn't know which tomato came from where so my opinion wouldn't be skewed.

Sunday, November 1, 2009

Oct. 20, 2009

Bought some boards of styrofoam building insulation today. I am going to use it for a prototype for the bench. The foam is easy to work with and lightweight. Then I'll fiber glass that I think. I am unsure of weather I will build a full scale model. I know that rotomolding would be an easy way to manufacture this bench but Im going to have to rotomold it myself so I may just do it half scale. I''ll kick it around for a few more days though, it really would be best to have a FULL scale working model of course.

Oct. 18, 2009

Today I did a bit of research on the kind of materials in bench will be made of. I think I am going to settle with an easily recyclable plastic with an antimicrobial coating to ensure that water stays fresh. I had originally wanted to make it so the water would be visible in the bench, but I just read that algae will be able to grow if sunlight is present. If the clean, filtered water is contaminated by algae people won't be able to drink it, which is something I want users to be able to do. If it's hot out, drink from the hose.

Oct. 17, 2009

Still haven't been able to work on the filter yet. I have been having trouble finding any terra cotta pots that aren't glazed and dont have a how in the bottom of the pot for drainage. The ceramic pot is porous which makes it possible for water to pass through the material. As the water moves through the ceramic many of the pollutants are removed. It's pretty cool stuff. The water will then get to the sand. After about 2 weeks of water trickling through the sand the top 5 inches or so of sand will create a biofilm consisting of bacteria, protozoa, and small little creatures that work together to clean the water. It sounds kinda strange that our water is cleaned this way but it's true. I may also include an activated carbon filter just like those used in brita water filters, but I haven't decided yet.

Oct. 15, 2009

Ok, so I have been working on the form of the bench today. I just did some prototyping with cardboard to get a better idea of the dimensions and logistics of this deal. I have all the measurements ready and I am going to begin work with where and how the filter will be incorporated in the bench. I also got an idea while working today about making these bench attachable, so you can connect several bench together. Tomorrow I am going to begin the prototype for the filter. I am curious as to just how clean this water will be. I will have to do some tests to see if it really is effective or if I will need to find another solution.

Oct. 14, 2009

One of the problems I have to figure out is how I will filter the water. I know that I want to mimic groundwater filtration. After reading and researching I think I have found a way of using an unglazed terra cotta pot, sand, gravel, and perhaps some activated carbon. I think its important to have a filtration system because in heavily populated cities rain water can have many bad chemicals and such we don't want to water our plants with. I think I will be able to work on a passive gravity fed filter to keep water clean.

Oc. 13, 2009

From this point I am going to commit to the rain water collection and harvesting idea. I have been sketching and ideating for the water collection and I think I am going to create a bench that doubles as a water collection tank. There will be a way for the user to use a hose to water plants in there garden space.

Oct. 11, 2009

Research has been going well for the small grow space. I would like to point out as well that I haven't committed to the grow space idea yet. I am also curious is harvesting rain water in urban gardening so I will be researching that as well. I would like to make some kind of filter for the water collector as well by mimicking the way ground water is filter.

Oct. 9, 2009

Thursday. I began brainstorming for studio today. I am looking at ways of producing food in small spaces without soil. Because the soil is just a medium and structure for the roots, i would like to look into a way of removing the soil from the equation, most likely hydroponics or aeroponics. I'm also curious as to how I can utilize collected rain water for the water system as well.



For my small grow space I would like to maximize the use of natural light and perhaps incorporating as little much artificial light as possible. Also, using materials such a mylar will help increase the reflectivity so that light can bounce off surfaces. The location of the lights will need to cover as many plants as possible.


I am just going to dive head first into this thing. I don't have much farming experience but I need to wrap my head around this subject. I have decided that I am going to try and build a small green closet in the studio space at school or in my apartment. I figure I will be able to use recycled water bottles, jars, and other recycled materials to cut down on material costs for prototyping.


I am also going to continue working on my bottle opener. I would prefer to use metal for my design rather than plastic so I will need to look into ways of bending and forming the metal.


Wednesday, October 7, 2009

Oct. 7,2009

So I finally cut my finished can openers today. They are still a little bigger than I think they need to be, but they work great and are fun to use. I will bend the shapes cut on the laser cutter in the oven to mimic how they would be made if they were made of stamped and folded metal, which is how I see them being produced. I still haven't gotten a card reader yet for my camera so I will add photos of my process and drawings soon.

Tuesday, October 6, 2009

Oct. 6, 2009

I was able to cut some of the forms out on the laser cutter today in acrylic. The pieces I cut worked well. I would like to shorten the opener a little bit and at a ring, which should make it easier to grip the opener when opening several bottles quickly.

Monday, October 5, 2009

Oct. 5, 2009


Oct. 4, 2009

I bought some plastic today and plan on heating the plastic up in the oven over some different shapes. The plastic hopefully take the curved planes of the wine and beer bottles. I hope the curve will give the thin plastic a bit more rigidity so it will handle the impact better.

Oct. 3, 2009

I built a first version of the bottle opener today. It's a scrap piece of mahogany cut to shape. It works by putting an end of the wood on the edge of the cap. Then popping the other end of the stick with your free hand or on a counter top to knock the cap off. after a few tries the would started splitting so I am going to put some plastic on the end of the wood. Also, the opener is pretty big and bulky so I want to see if I will be able to cut down the size and weight.

Oct. 2, 2009


I need to find a reasonable material that would give out and will have the correct stiffness and strength for opening the bottle. I am going to use a combination of plastic and wood for my opener because these have the strength and are cheap and easily accessible.

Oct. 1, 2009


Our 1st assignment is directed towards bottle openers. I have been thinking of different ways to open bottles. How do I open a bottle when I don't have a bottle opener? I thought about opening bottles with lighters, belt buckles, counter edges, with other bottles, even with a sheet of paper. Its basically a lot of force directly on the edge of the cap to pry it away from the bottle, once a small part of the cap is off the lip of the bottle the cap comes off easily.